Skip to Content

Choosing a display for TMxCore

A practical guide to choosing a touchscreen for TMxCore - from resolution and connections to mounting and protection.
November 18, 2026 by
Thomas Valter

TMxCore has no built-in display. If you use TMxCore with a network display, you may not need a dedicated display at all. If you prefer a directly connected screen, you can choose one that suits your setup, whether that means a touchscreen on a table, a rack installation, or a display integrated into a control panel.

Every display we have used with TMxCore has worked. The biggest difference has been the quality of the touch experience. Some screens have felt much better than others, so we recommend looking beyond price alone.

Specific models change frequently. Instead of recommending a screen that may soon disappear from the market, here is what we suggest looking for.


Resolution and size

Choose at least HD resolution, with Full HD (1920 × 1080) as our recommended starting point when buying a new display.

Select the physical size to suit the installation. You should be able to read the interface comfortably and operate its controls without stretching or leaning forward. A larger display is useful only if it also fits the space and remains within easy reach.


Choose a good capacitive touchscreen

We recommend a capacitive touchscreen, preferably projected capacitive, often listed as PCAP.

Touch quality deserves particular attention. In our experience, a screen can display the interface perfectly well while still being frustrating to operate. Missed taps, inconsistent response, or poor accuracy make everyday use harder than it needs to be.

Be cautious with the cheapest options. The word “touchscreen” alone tells you very little about how a display feels in practice. If possible, try it before buying, or choose a supplier with a suitable return policy.



Check both the video and touch connections

For a straightforward setup, look for:

  • HDMI or DisplayPort input for the picture, matching the connection on your TMxCore.

  • A USB connection for touch data back to TMxCore. TMxCore features USB-A connectors.

  • The display’s required power supply.

With this arrangement, HDMI or DisplayPort carries the picture, while USB carries your touch input. Connecting only the video cable will not provide touch control.


Plan for display power

TMxCore can supply power through its USB ports, but the available power is often insufficient to run an external display. A screen having a USB power input does not necessarily mean TMxCore can power it.

Check the display’s power requirements and plan to use its supplied power adapter or another manufacturer-approved power source. Treat the USB connection to TMxCore primarily as the connection for touch data.


Decide how to mount it before buying

The mounting arrangement can narrow your choices considerably.

For tabletop use, choose a stable stand with a comfortable tilt angle. Touching the display should not make it rock or slide.

For an arm or bracket, check the VESA mounting pattern, display weight, and the mount’s capacity.

For rack or panel installation, check the complete dimensions, mounting hardware, and available depth. Leave room for connectors, cable bends, ventilation, and access for maintenance. Open-frame or panel-mount displays may be worth considering for an integrated installation.

Plan the mounting and cable routing together. A screen that fits the opening may still leave too little space for its connections.


Consider IP65 where water or dust is a concern

For installations exposed to dust or water, an appropriately rated display may be a sensible choice. IP65 means dust-tight protection and protection against water jets under defined test conditions. It does not indicate suitability for immersion.

Read the specification carefully: some displays are rated IP65 on the front only. The rear housing and connections may need protection inside a suitable enclosure, with the display installed and sealed according to the manufacturer’s instructions. 


When industrial grade makes sense

A good desktop touchscreen may be sufficient for a clean indoor installation. For more demanding environments, consider an industrial-grade display.

Look for specifications that match the actual conditions: operating temperature, permitted operating hours, enclosure construction, mounting options, and protection against dust or water. Treat “industrial grade” as a reason to examine those details closely.

Our recommendation is to start with a good capacitive touchscreen, preferably Full HD, with HDMI or DisplayPort for video and USB for touch. Then choose the mounting and environmental protection that suit the installation. Spending a little more on dependable touch response and a solid mounting arrangement can make TMxCore much more comfortable to use every day.