Main unit (with 7" touch screen 16 : 9) | ● | ● | ● | ● |
Table-top frame | ● | – | ● | – |
Table-stand | ● | – | ● | – |
Audio Interface | ||||
AES3 In (transf. bal., 110 ohm)° | 2 x | 2 x | 2 x | 2 x |
Sampling rates | 44.1, 48, 96 kHz | 44.1, 48, 96 kHz | 44.1, 48, 96 kHz | 44.1, 48, 96 kHz |
AES3 Out° | 2 x | 2 x | 2 x | 2 x |
Connectors | ||||
XLR-F | 2 x | 2 x | 2 x | 2 x |
XLR-M | 2 x | 2 x | 2 x | 2 x |
4-pin 24 V DC | ● | ● | ● | ● |
RJ-45 (LAN/Ethernet) | ● | ● | ● | ● |
USB-A | 2 x | 2 x | 2 x | 2 x |
RJ-12 6P6C (GPIO) | ● | ● | ● | ● |
VGA | ● | ● | not used | not used |
Software | ||||
Standard equipment | basic | basic | complete | complete |
Modular expansion with licenses*: | SW20002* | SW20002* | – | – |
SW20003* | SW20003* | – | – | |
SW20006* | SW20006* | – | – | |
SW20008* | SW20008* | – | – | |
SW20014* | SW20014* | – | – | |
Presets | up to 32 | up to 5 | ||
Instruments and functions | ||||
4-Channel PPM (digital AES3° input sources via XLR) | ||||
Channel layout | ||||
- Stereo | ● | ● | ● | ● |
- 2 x Stereo | ● | ● | ● | ● |
- Single channels (up to 4 x ) | ● | ● | ● | ● |
- Multi-channel up to 4 channels | ● (no 3.1) | ● (no 3.1) | – | – |
Display | Peak level, Peakhold, Numerical value, Digital Over | |||
Functions | Gain (+20 dB, +40 dB acc. to standard), Peakhold on/off, Memory, Memory Reset | |||
Word width | 24 bit | |||
Scales | Standard equipment | Full equipment | ||
- TP60: +3 .. –60 dB | ● | ● | ● | ● |
- Dig60: 0 .. –60 dB | ● | ● | ● | ● |
- DIN5: +5 .. -50 dB | ● | ● | ● | ● |
- Nordic: +12 .. -42 dB | ● | ● | ● | ● |
- BR IIa: 7 .. 1 | ● | ● | ● | ● |
- BR IIa ext: 7..1 | ● | ● | ● | ● |
- BR IIb: +12 .. -12 dB | ● | ● | – | – |
- BRIIb ext: +12..-12 dB | ● | ● | – | – |
Scale extension | activatable with SW20006* | not extendable | ||
- TP20: +3 .. –20 dB | ● | ● | – | – |
- Dig20: 0 .. –20 dB | ● | ● | – | – |
- Dig0: +18 .. 0 dB | ● | ● | – | – |
- Dig18: +18 .. –18 dB | ● | ● | – | – |
- Dig40: +20 .. –40 dB | ● | ● | – | – |
- ARD9: +9 .. –60 dB | ● | ● | – | – |
- DIN10: +10 .. –50 dB | ● | ● | – | – |
- Zoom10: +10 .. –10 | ● | ● | – | – |
- Zoom1: +1 .. –1 | ● | ● | – | – |
Headroom/Headroom Ref. | adjustable in the range from 0 to –20 dB in steps of 1 dB | |||
Operation field | adjustable in the range from 0 to –20 dB in steps of 1 dB | |||
Integration time (Attack) | acc. to corresponding standard or selectable: | |||
Sample, 20 ms, 10 ms, 1 ms, 0,1 ms, 150 ms for British scales | ||||
Gain | +20 dB, +40 dB acc. to standard | |||
High-pass filter | Off, 5 Hz, 10 Hz, 20 Hz | |||
Peakhold indicator | 1 s, 2 s, 4 s, 10 s, 20 s, 30 s, | |||
manual reset or off | ||||
Over indicator hold time | 1 s or manual | |||
Over indicator PPM | ||||
- Threshold | Full Scale, Full Scale -1LSB, Full Scale -2LSB, –0.1 dBFS, –0.5 dBFS, –1 dBFS, –2 dBFS, –3 dBFS | |||
- Attack time | 1 to 15 samples | |||
- Word width | 16 to 24 bit, selectable | |||
Over indicator TruePeak | ||||
- Threshold | adjustable in the range from –4 to 0 dBTP in steps of 0.1 dBTP | |||
Stereo Correlator | ||||
Display | Bargraph, additional spot indicator between PPM Stereo bargraphs | |||
Scale range | -1 r to 0 to +1 r | |||
Color settings | red: -1 r to -0.1 r | |||
white: 0 r (-0.1 r to +0.1 r) | ||||
green: +0.1 r bis +1 r | ||||
Attack/release time | 1.0 s/2.5 s | |||
Audio Vectorscope | ||||
Display mode | 2-channel | |||
Inputs | L/R (Stereo signal with the input channels of the selected audio group) | |||
AGC | fast/slow | |||
Grid | L/R or M/S | |||
AES3 Status Monitor | ||||
Display | • Channel data are displayed as plain text, hex or binary | |||
• Channel selectable | ||||
• Audio bit activity | ||||
• Hardware status | ||||
Global Keyboard | ||||
Functions | • simultaneous control of defined functions in multiple instruments | |||
• Preset recall | ||||
• external control (functions, presets) with the integrated GPIO interface | ||||
Gain Reduction | ||||
Display | 1 bargraph for Mono and Stereo formats, up to 4 bargraphs in multi-channel mode |
– | – | |
Input | Date stream via TCP/IP and LAN interface | – | – | |
Input routing | external featured streams selectable | – | – | |
Marker | adjustable threshold for the definition of upper and lower display section | – | – | |
Colors | 32 colors for each bargraph section | – | – | |
Loudness | ||||
Functions | activatable with SW20002* | integrated | ||
Instruments | • Loudness Sum (bargraphs for M, S, I; selectable) | |||
• Loudness Num (numerical values for: M, S, I, LRA, TPmax, Mmax, Smax, I-time; selectable) | ||||
• Loudness Range (LRA) | ||||
• SPL-Meter | ||||
Display | Bargraphs for each single channel (can be combined with PPM bargraphs) | – | – | |
Implemented standards | ITU-R BS.1770-4/1771-1, EBU R128, ATSC A/85, ARIB, OP-59, AGCOM, CALM Act, LEQ(M), TASA, SAWA | |||
Custom mode | ● | ● | – | – |
Loudness scales | selectable or fixed depending on Loudness standard: | |||
• EBU+9: +9 .. –18 LU | ||||
• EBU+3: +3 .. –18 LU | ||||
• EBU+18: +18 .. –36 LU | ||||
• EBU+9a: 14 .. –41 LUFS | ||||
• EBU+18a: –5 .. –59 LUFS | ||||
• EBU0: 0 .. –60 LUFS | ||||
• ITU+9: +9 .. –18 LU | ||||
• ITU0: 0 .. –30 LKFS | ||||
• ATSC0: 0 .. –60 LKFS | ||||
• ATSC0a: 0 .. –30 LKFS | ||||
• Leq(M) | ||||
• TASA | ||||
• SAWA | ||||
Weighting filter | K filter acc. to ITU BS.1770 fixed | |||
Target Level | only for Loudness standards ITU, EBU, ATSC, ARIB, CALM, OP-59, AGCOM: | |||
• –23 LUFS; adjustable in the range from –10 to –30 LUFS in steps of 1 LUFS or | ||||
• –24 LKFS; adjustable in the range from –10 to –30 LKFS in steps of 1 LKFS | ||||
(depending on selected standard) | ||||
Reference level | only for Loudness standards Leq(M), TASA, SAWA: | |||
• Leq(M): 78 dB; adjustable in the range from 68 to 88 dB in steps of 1 dB | ||||
• TASA: 85 dB fixed | ||||
• SAWA: 82 dB fixed | ||||
Weighting filter | • only for Loudness standards Leq(M), TASA, SAWA: | |||
linear, A (Leq(A)), C, CCIR (Leq(M)), ITU BS.1770 (k) | ||||
Time & Gate Momentary | ||||
- Window Time | in ITU, EBU, ATSC, ARIB, CALM, OP-59, AGCOM fixed: 400 ms | |||
in Custom mode selectable in the range from 200 ms to 1000 ms in steps of 100 ms | – | – | ||
- Integration Time | in Leq(M), TASA, SAWA fixed: IEC 1000 ms slow | |||
in Custom mode selectable: IEC 125 ms Fast, 250 ms (IRT), 500 ms, 750 ms, IEC 1000 ms Slow, 1500 ms, 2000 ms | – | – | ||
Time & Gate Short | ||||
- Integration Time | in EBU, ARIB, Leq(M), TASA, SAWA fixed: 3 s | |||
in Custom mode and in ITU, ATSC, CALM, OP-59, AGCOM selectable in the range from 1 to 20 s in steps of 1 s | in ITU, ATSC, CALM, OP-59, AGCOM selectable in the range from 1 to 20 s in steps of 1 s | |||
Time & Gate Integrated | ||||
- Silence Gate | in EBU, AGCOM fixed: –70.0 LUFS/LKFS | |||
in Leq(M), TASA, SAWA fixed: off | ||||
in ITU, ATSC, ARIB, CALM, OP-59 selectable: –70.0 LUFS/LKFS or off | ||||
in Custom mode selectable in the range from –80.0 to –40.0 LUFS/LKFS in steps of 0.5 LUFS/LKFS, switchable | – | – | ||
- Relative Gate | in EBU fixed: –10.0 LU | |||
in AGCOM fixed: –8.0 LU | ||||
in Leq(M), TASA, SAWA fixed: off | ||||
in ITU, ATSC, ARIB, CALM, OP-59 selectable: –10.0 LU or off | ||||
in Custom mode selectable in the range from –80.0 to –40.0 LUFS/LKFS in steps of 0.5 LUFS/LKFS, switchable | – | – | ||
Channel weighting | in ITU, EBU, ATSC, ARIB, CALM, OP-59, AGCOM, Leq(M), TASA, SAWA fixed: 0.0 dB (L, R) | |||
in Custom mode selectable between –6 and +6 dB in steps of 0.5 dB | – | – | ||
Tolerance levels | ||||
- TP Headroom | –9.0 dB; adjustable from 0 to –20 dB in steps of 0.1 dB | |||
- TP Over threshold | –1.0 dBTP; adjustable from 0 to –4 dBTP in steps of 0.1 dBTP | |||
- M High | +1.0 LU; M tolerance above Target Level adjustable from 0 to +10 LU in steps of 0.1 LU | |||
- M low | –1.0 LU; M tolerance below Target Levels adjustable from 0 to –12 LU in steps of 0.1 LU | |||
- S High | +1.0 LU; S tolerance above Target Level adjustable from 0 to +10 LU in steps of 0.1 LU | |||
- S Low | –1.0 LU; S tolerance below Target Levels adjustable from 0 to –12 LU in steps of 0.1 LU | |||
- I High | +1.0 LU; I tolerance above Target Level adjustable from 0 to +10 LU in steps of 0.1 LU | |||
- I Low | –1.0 LU; I tolerance below Target Levels adjustable from 0 to –12 LU in steps of 0.1 LU | |||
Test Time Control | ||||
Functions | activatable with SW20002* | integrated | ||
Start | ||||
- Functions | • Autostart after preset load | |||
• Autostart with gate | ||||
• Autostart with gate and autoreset | ||||
• manually via keys or GPI | ||||
with license SW20008* active also: | – | – | ||
• Timecode | ||||
• Timecode with recalculation | ||||
- Level for gate | –70.0 LUFS/LKFS; adjustable from –85 to –10 LUFS/LKFS in steps of 0.5 LUFS/LKFS | |||
Stop | ||||
- Functions | • manually via keys or GPI | |||
• Autostop with gate | ||||
• Autostop with gate and time | ||||
with license SW20008* active also: | – | – | ||
• Timecode | ||||
- level for gate | –70.0 LUFS/LKFS; adjustable from –85 to –10 LUFS/LKFS in steps of 0.5 LUFS/LKFS | |||
- Time for gate | 1 s; adjustable from 1 to 15 s in steps of 1 s | |||
Loudness Range (LRA) | ||||
Functions | activatable with SW20002* | integrated | ||
Display | graphical display of the Loudness Range | |||
Modus | selectable: LRA Bar, MagicLRA, MagicLRA + I, MagicLRA + I + Num | |||
Scale range | selectable: 6 LU, 10 LU, 20 LU, 30 LU | |||
LRA low range | 2 LU; adjustable in the range from 1 to 20 LU in steps of 1 LU | |||
Comfort zone | 4 LU; adjustable in the range from 1 to 20 LU in steps of 1 LU | |||
LRA high range | depends on the selected scale range and the spread of the comfort zone | |||
Colors | selectable for each range | |||
SPL Meter | ||||
Functions | activatable with SW20002* | integrated | ||
Display | • Bargraphs for each single channel (can be combined with PPM bargraphs) | |||
• Bargraph for SPL sum of the channels | ||||
Reference point | adjustable in the range from 68 to 88 dB in steps of 1 dB | |||
Weighting | Linear, A (Leq(A)), C, CCIR (Leq(M)), k | |||
Integration time | Fast (125 ms), Slow (1 s) | |||
RTA - Real Time Analyzer | ||||
Functions | activatable with SW20003* | integrated | ||
Input selection, Peakhold on/off, A-, C-weighting or Linear, Integration time, set reference, scaling, rrequency range, bargraph arrangement, display-hold | ||||
Input sources | selectable: single channels, Stereo pairs (depending on selected mode) | |||
Frequency range | • Norm: 20 Hz to 20 kHz, additional band > 20 kHz switchable | |||
• LF: 5 Hz to 5 kHz | ||||
Number of bands | • 1/3-octave: 31 bands, filter acc. to IEC 225 class 2 | |||
• 1/6-octave: 61 bands | ||||
• 1/12-octave: 120 bands | ||||
Weighting filter | selectable: Linear, A, C | |||
Peakhold indicator | 1 s, 2 s, 4 s, 10 s, 20 s, 30 s, manual reset or off | |||
Measuring range | max. 45 dB | |||
Scaling | 3, 6, 9 dB | |||
Integration time (ballistics) | Impulse, Fast, Slow, Peak (10 ms) | |||
Moving Coil (needle instruments, only available in Stereo mode) | ||||
Functions | activatable with SW20006* | integrated | ||
Display type | PPM (L/R), PPM (M/S), VU, Loudness, PPM + Loudness (L/R; M, S or I), selectable | |||
PPM | ||||
- Channel arrangement | Dual, Dual + M/S horizontal, Dual + M/S vertical, Stereo horizontal, Stereo vertical | |||
- Scales | • BR IIa: 7..1 | |||
• BR IIa ext: 7..1 | ||||
• BR IIb: +12..–12 dB | ||||
• BR IIb ext: +12..–12 dB | ||||
- Integration time | Sample, 0,1 ms, 1 ms, 10 ms, 20 ms, 150 ms | |||
- Headroom Ref. | –10 dB; adjustable from 0 to –20 dB in steps of 1 dB | |||
- S-Modus | only available, if M/S type is selected: M3, M6 | |||
- Peak indicator | off, Peak, True Peak, BR Peak | |||
- BR Peak Threshold | • for BR IIa: 6 dB; adjustable from 4 to 7 dB in steps of 1 dB | |||
• for BR IIb: 6 dB; adjustable from 0 to 12 dB in steps of 1 dB | ||||
VU | ||||
- Channel arrangement | Stereo horizontal, Stereo vertical | |||
- Scale | VU Digital (–20 to + 3 dB) | |||
- Lead | 0 dB, adjustable from 0 to 12 dB in steps of 1 dB | |||
- Peak indicator | off, Peak, True Peak | |||
Loudness | available when SW20002* is active | integrated | ||
- Channel arrangement | Dual, Stereo horizontal, Stereo vertical | |||
- Scales | acc. to Loudness settings | |||
- Integration time | acc. to standard | |||
- Peak indicator | off, no selectable option available | |||
PPM + Loudness | available when SW20002* is active | integrated | ||
- Channel arrangement | Dual-PPM (as described above) with additional Loudness display (BBC mode) for M, S or I (selectable) in one instrument | |||
- Scales | PPM: | |||
• BR IIa: 7..1 | ||||
• BR IIa ext: 7..1 | ||||
• BR IIb: +12..–12 dB | ||||
• BR IIb ext: +12..–12 dB | ||||
each with Loudness: | ||||
• +9 bis –9 LU fixed (mid of scale corresponds to Target Level of selected Loudness standard) |
||||
- Integration time | Sample, 0,1 ms, 1 ms, 10 ms, 20 ms, 150 ms | |||
- Headroom Ref. | –10 dB; adjsutable from 0 to –20 dB in steps of 1 dB | |||
- Peak indicator | off, Peak, True Peak, BR Peak | |||
- Loudness type | M, S, I, selectable | |||
Numerical display | switchable in all modes | |||
Timecode Reader | ||||
Functions | activatable with SW20008* | – | – | |
Display | numerical display of LTC | – | – | |
Mode | Timecode as domain in a separate audio group | – | – | |
Input | one digital channel | – | – | |
Colors | selectable, 32 colors | – | – | |
Loudness Recalculation | ||||
Functions | activatable with SW20002* and SW20008* | – | – | |
Display | numerical display of | – | – | |
• Current timecode | ||||
• Start time < current timecode < stop time (with activated recalculation) | ||||
Start | ||||
- Functions | additional test time control: | – | – | |
• Control via timecode | ||||
• Control via timecode and recalculation | ||||
Stop | ||||
- Functions | additional test time control: | – | – | |
• fixed to timecode, when start function is set to a timecode option | ||||
Logging | ||||
Functions | activatable with SW20002* and SW20014* | – | – | |
• Logging of Loudness and TruePeak data of two audio groups | – | – | ||
• Data storage on USB flash drive | ||||
• Transmission to LQL PC software via IP | ||||
• Primary and secondary limits (individual markers) for Mmax, Smax, I and TPmax | ||||
• Data collection control automatically via LQL or manually via key | ||||
Mode | selectable: off, USB, IP | – | – | |
Display | Status: LQL access, USB mode, deactivated | – | – | |
Identification for network | definable: Device name, password | – | – | |
Key functions for USB | USB run, USB close (and save data)) | – | – | |
Chart | ||||
Functions | activatable with SW20002* and SW20014* | integrated | ||
Bargraph | • horizontal running for TP, M, S, I (selectable) | |||
• individual color selection for normal, operation range, Headroom, Over, invalid (depending on selected value) | ||||
• Color change indicates common quality of the Loudness values | ||||
Graph | • Progress (value over time) of up to 4 selectable values (TP, M, S and I) as lines, points, rectangles or 1 value as colored areacontinuously drawn on a coordinate system | • Progress (value over time) of the selected value (TP or M or S or I) as colored area | ||
• individual color selection or colors of bargraphs | • Colors of bargraphs | |||
• switchable tolerance indicator | • Tolerance indicator | |||
• switchable position of the Relative Gate (when activated) | ||||
• switchable vertical Integrated bargraph | ||||
Time range | Time grid adjustment: increase/decrease in steps of one or ten units, or magnified to available width | |||
Time range presets | ||||
- Auto stretch | automatic stretch of a stopped loudness measurement to the available width of the instrument‘s window, switchable (except when controlled via timecode) | automatic stretch of the selected time unit to the available width of the instrument‘s window | ||
- Hours | 0 h; adjustable from 0 to 3 h in steps of 1 h | |||
- Minutes | 1 m; adjustable from 1 to 59 min in steps of 1 min | |||
Time select | • Marker for current time period | |||
• Increase or decrease of the marker in step sizes corresponding to the current time grid | ||||
• Shift of the marker and magnification of the content | ||||
Tolerance levels | adjustable, see Loudness | |||